Lattice Cutwork Plantain T-shirt

Lattice Cut-out Plantain

Over my sadly sewing-free Christmas vacation I had been window shopping (or whatever you call the on-line equivalent) for laser cut shirts. I don’t think the ability to laser cut fabric is that new, but for some reason I’ve been seeing a lot of really cool applications of the technology lately like lace patterns in leather. Of course I don’t have a laser, but with knits or other fabrics that don’t fray you could do the same with a scissors. I saw one shirt with a lattice / grid type pattern that I thought would be easy to duplicate. I was planning on just buying a RTW T-shirt and chopping it up, but then French indie pattern company Deer & Doe released a free knit T-shirt pattern, the Plantain T-shirt, that was exactly the swingy shape I was looking for. And then they announced a contest for said pattern and I figured, hey, why not kill two birds with one stone?

My alterations to the pattern were to widen it by about 2 inches and raise the neckline to give me a little more room to add the cutwork design. (By the way, in France a size 46 is apparently a 41″ bust? I expected the size chart to be similar to Burda, but I guess every European country does their own thing.) The length ended up being perfect. I like this so much as basic T-shirt that I will be printing off the 3/4 and long sleeve options and saving this as a TNT T-shirt pattern for the future.

The cutwork part of the project required some experimentation. First I pulled a tencel slate blue knit out of my stash because I liked the color, but when I tried cutting a couple squares out the fabric as a test I realized that because the tencel knit didn’t have much recovery the lattice pattern would distort under the weight of the fabric beneath it. Back to my stash I went, and I found this taupe slinky knit that had the right amount of drape but also 8% lycra so it wouldn’t stretch out of shape while wearing.

Next I experimented with methods of cutting out the squares to see what would be most efficient. A scissors worked well for my initial testing, but I was hoping for something where I could keep the fabric flat to be more precise. A rotary cutter, even a very small one, just did not have the accuracy for stopping and starting that I needed. I tried an xacto knife but the pointy blade dragged the fabric too much instead of cutting. Finally I found an Olfa brand craft knife I had bought awhile ago at Michael’s that had an assortment of different blades, one of which was a flat chisel shape. That worked perfectly to just push down on each side of the square to cut. If you wanted to do more organic or curvy shapes, I don’t know what you could do except use a scissors.

Xacto knife

To determine what the grid would look like on the shirt I drew up a grid in Photoshop and printed a few pages worth to tape together then laid it on top of the shirt and cut it in a V shape that I wanted along the neckline. This step was probably entirely unnecessary, but I wanted to get an idea of what it would look like before I started cutting. Next I used my SA curve rulers to trace the seam allowance along the edges of the pattern with a washable marker. (I didn’t want to cut out anything within the seam allowance.) Finally I drew the grid lines in with a ruler, and I was ready to cut.

Lattice grid placement

After I found the neckline didn’t take too long I decided to do the sleeves as well. A couple episodes of Breaking Bad and I was done with the cutwork. The rest was just boring serging. I also used a twin needle on my regular machine to hem, which I’m happy to say turned out really nice on a slinky knit with no tunneling.

Cutwork closeup

Here’s a closeup of the finished design. I know I’m no laser, but not too shabby, right?

Advertisements

12 thoughts on “Lattice Cutwork Plantain T-shirt

  1. Fantastic, Jamie! This looks so great. This is a great color on you. How many hours did it take? How is it, as the other comment mentioned, that it doesn’t stretch the squares out? It lays perfectly.

    Like

    • I’d say the cutting portion took maybe 3-4 hours? I spent a fair amount of time before that though playing around with fabrics to figure out what I wanted to do. I’d say 10-12 hours total with the serging? I have no idea how it doesn’t stretch out, but I’m glad!

      Like

  2. I love it! What a great idea: a t-shirt with *flair*. Your cutting skills are top-notch. How clever you are to use a chisel blade.

    I’m off the check out Deer & Doe patterns now.

    Like

  3. That’s amazing! Conventional wisdom would say that slinky fabric will pull down the open areas of your laser cuts. But it does not — the cut out squares look perfect! Thanks for sharing your lovely project. Now I have to put the Olfa craft knife on my shopping list…

    Like

We love to hear from you

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s